print this page Humeca Mesher products |
|||
Skingraft Mesher
In addition to the V-carriers, Humeca developed a
mesher to complete the product line for meshgrafting.
The Humeca®
mesher is provided with a unique spring mechanism that prevents the
blades from exerintg excessive pressure on the carrier during
cutting, thus increasing the life time of the blades. These springs can
meet with thickness variations in carriers. The springs can be
adjusted in two positions: one for the V10- or Zimmer®
carriers and one for the V15- or Aesculap® / B.Braun®
carriers.
During cutting the
carrier is guided both at the left and the right side to assure
straight movement and exact connection of the grooves of a second
carrier if applied.
Unlike most
conventional meshers, where the carrier is moved through the device
by means of intermittently pulling a ratchet, the Humeca®
mesher is driven by the continuous rotation of a handle. A
gearwheels set limits the required force. The rotation makes meshing
procedure less time consuming and the design is far more ergonomic.
The 50 blades are
mounted on an axis, with an interspace of 1.5 mm between the
intersecting lines. Both cutting axis and individual blades can be
replaced.
Opening the bridge of
the mesher allows easy access to the cutting axis for cleaning and
inspection.
The mesher can be
washed and steam sterilized before use. A compact stainless steel
sterilization case is available. For more information on products and the latest manuals and instructions, see: www.humeca.nl |
|||
© Höjmed AB – 2009 |
|
